Plastic crystallizer evaporative, recycling using PET dehumidifier drying Crystallization Machine Price,PET Infrared Crystallizer

Short Description:

Up to 60% less energy consumption than conventional drying system

Uniform crystallization

No pellets clumping & stick

Crystallization colour Milk white

Crystallization time need : 20mins
Crystallization temperature : Independ adjustable
Energy consumption : About 0.07kwh/kg
Need pre-drying or not : Instant start-up and quicker shut down
Machine test : Yes , for free

Send email to us

Product Detail

Product Tags

PET Infrared crystallization Dryer for R-PET Pellets ----OD Technology Made

>> Dry &Crystallize PET Chips/Flake/Pellets in 20mins at 30ppm by saving 45-50% energy cost.

Up to 60% less energy consumption than conventional drying system
Uniform crystallization
No pellets clumping & stick
Crystallization colour Milk white
Carefully material treatment
Instant start-up and quicker shut down
Independent temperature and drying time set
No segregation of products with different bulk densities
Easy clean and change material

How to Maximize product added value of R-PET Pellets/ PET Pellets made by Bottle flake by Infrared crystallization Dryer?

1	Uniform crystallization ,high in crystallization rate Crystallization colour: pure white	The selling price will be USD30-50 Per ton
2	Crystallization and dry will be finished in one step The final moisture can be ≤50ppm	It will be a good point to next user, like the PET Preform manufacture, PET Sheet manufacture or Fiber manufacture etc. It will shorten their pre-drying time.
3	Complete machine controlled by Siemens PLC Touch screen with memory function, one key start.	To reduce the technique labour cost.
4	Save almost 45-50% energy cost compared with Dessicant dryer	Take 500kg/h Infrared crystal dryer model as example, the electrical cost is less than 100W/KG/HR

What we can make for you

>>Limit the hydrolysis degradation of the viscosity.

>>Prevent increasing AA levels for materials with food contact

>>Increasing the capacity of the production line up to 50%

>>Improvement and make the product quality stable-- Equal and repeatable input moisture content

>>There are three P.I.D temperature control zones, and the crystal drying temperature can be set according to the characteristics of the raw materials.

>>Rotary working style can be act as mixer. You can feed the percentage PET Chips and recycled pellets to our Infrared crystal dryer directly, it will mix the material automatically

How to work

Feeding/Loading

Dry& Crystallization Processing

Discharging

>>At first step, the only target is to heat up the material to a preset temperature.

Adopt relatively slow speed of drum rotating, the Infrared lamps power of the dryer will be at a higher level, then the PET pellets wili have a fast heating till the temperature rises to the preset temperature.

>>Drying &Crystallizing step

Once the material gets to the temperature, the speed of the drum will be increased to a much higher rotating speed to avoid the clumping of the material. At the same time, the infrared lamps power will be increased again to finish the drying. Then the drum rotating speed will be slowed down again. Normally the drying process will be finished after 15-20mins. (The exact time depends on the property of material)

>>After finishing the drying processing, the IR Drum will automatically discharge the material and refill the drum for the next cycle.

The automatic refilling as well as all relevant parameters for the different temperature ramps is fully integrated in the state-of-the-art Touch Screen control. Once parameters and temperature profiles are found for a specific material, theses settings can be saved as recipes in the control system.

Machine photos for reference

Material free testing

Experienced engineer will make the test. Your employees are cordially invited to participate in our joint trails. Thus you have both the possibility to contribute actively and the opportunity to actually see our products in operation.